## How to Clear Water from Mask While Scuba Diving
As a scuba diver, one of the most important pieces of equipment you have is your mask. A clear mask is essential for good visibility and safety underwater. However, even the best masks can fog up or get water in them from time to time. If this happens, it’s important to know how to clear your mask quickly and effectively.
There are a few different ways to clear water from a scuba mask. The most common method is the “mask clearing maneuver.” To perform the mask clearing maneuver, follow these steps:
1. Look up. This will help to drain any water that has collected in the bottom of your mask.
2. Pinch your nose and exhale. This will force air up into your mask, which will help to clear the water.
3. Lift your head up. This will help to drain any remaining water out of your mask.
4. Repeat steps 2 and 3 until your mask is clear.
If the mask clearing maneuver does not work, you can try the following methods:
The “mask squeeze.” This method involves squeezing the sides of your mask to force water out. To perform the mask squeeze, pinch the sides of your mask and gently squeeze. Be careful not to squeeze too hard, as this could damage your mask.
The “mask lift.” This method involves lifting the bottom of your mask to allow water to drain out. To perform the mask lift, place your index finger on the bottom of your mask and gently lift it up. Be careful not to lift the mask too high, as this could cause it to come off.
Once you have cleared the water from your mask, be sure to rinse it out with clean water to remove any remaining salt or debris.
### Tips for Preventing Water from Getting in Your Mask
There are a few things you can do to help prevent water from getting in your mask:
Use a mask strap that fits snugly. A loose mask strap can allow water to seep in around the edges.
Tilt your head back slightly when you surface. This will help to prevent water from splashing into your mask.
Blow bubbles out of your nose when you surface. This will help to keep water from entering your mask through your nose.
Use a defogging solution. Defogging solutions can help to prevent your mask from fogging up, which can lead to water getting in.
### Conclusion
Knowing how to clear water from your mask is an essential skill for scuba divers. By following the tips in this article, you can help to ensure that you always have a clear view of the underwater world.